N.E.A.T. System™
Non-porous. Engineered. Applied. Tested. The commercial-grade seamless floor system Epoxy Guys build for warehouses, automotive service, manufacturing, kitchens, medical facilities, retail, aviation hangars, and marine bays across Southwest Florida.
N.E.A.T. is the commercial version of everything Epoxy Guys learned building the Signature residential system. Where Signature optimizes for residential aesthetics and 1-day turnaround, N.E.A.T. optimizes for industrial durability, sanitary cleanability, and facility-floor lifespan. The four letters are the four standards every install must hit: non-porous (no pinholes, no seams, no places for contamination to take root), engineered (the slab is moisture-tested and the chemistry is matched to the application), applied (by our own trained crews, not subbed out), and tested (every install is QA-walked before we hand it over).
The system comes in two configurations. Two-coat standard is our high-volume commercial install. 100% solids epoxy basecoat plus a polyaspartic topcoat, typical install in 1-2 days for spaces up to 5,000 sq ft. Three-coat heavy-duty adds an intermediate broadcast layer for impact, abrasion, and chemical resistance, the spec we use for forklift traffic, aircraft tow-back yards, manufacturing floors with frequent tool-drops, and kitchens that take heavy daily punishment.
We install N.E.A.T. across the full Southwest Florida coast: aviation hangars at Page Field in Fort Myers, marine maintenance bays in Marco Island and Punta Gorda, restaurant kitchens and medical labs in Naples, manufacturing floors in Bonita Springs, automotive dealership service drives in Fort Myers and Cape Coral. Request a commercial quote or call (239) 300-0546.
The system, layer by layer.
Four standards. Every install honors all four. None is optional.
Non-Porous
No pinholes. No seams. No micro-cracks for contamination, bacteria, or chemicals to settle into. Sanitary by spec, not by promise.
Engineered
Slab moisture-tested before install. Chemistry matched to the application: solvent resistance for automotive, antimicrobial for medical, USDA-compatible for food service, anti-static for electronics.
Applied
Our own crews. We don’t sub commercial installs. Every installer is trained in-house on the N.E.A.T. spec checklist. Phased install schedules available for facilities that need to stay operational.
Tested
Every install gets a QA walk before handover. Adhesion test, visual inspection, edge check, drain check, coverage check. Documented and signed off.
Where this system fits.
Commercial verticals where N.E.A.T. is the right spec.
Aviation Hangars
High-gloss white or gray, Skydrol-resistant, anti-slip. Hangars at Page Field and Naples Municipal.
Warehouses & Logistics
Forklift-rated, line-stripe-compatible, dust-resistant. Floors that take cycle traffic without scoring.
Automotive Service
Brake-fluid and oil-resistant, easy hot-water cleanable, slip-resistant when wet. Standard at dealership service drives and quick-lubes.
Manufacturing
Chemical and impact resistant. Heavy-duty 3-coat for facilities with frequent tool-drop and forklift movement.
Medical & Lab
Antimicrobial chemistry, cove base for sanitary transitions, fully sealed. USDA / FDA / GMP-compatible builds.
Restaurant Kitchens
Hot-water-rated, grease-resistant, slip-rated for wet floors. Cove base integration with floor drains.
Retail Showrooms
High-gloss decorative-grade finish. The N.E.A.T. base, finish-graded for visual emphasis.
Marine & Waterfront
UV-stable, salt-air-resistant chemistry. Marina maintenance bays, dock-side facilities, waterfront commercial.
How an install runs.
When to pick which.
100% Solids Epoxy + Polyaspartic
Light commercial, retail, offices, light warehouse, medical waiting areas, dry food service. Where seamless and sanitary matter more than impact resistance.
+ Intermediate Broadcast
Forklift traffic, manufacturing floors, aviation tow-back, automotive bays, food production. Adds physical thickness, slip resistance, and recovery from drops.
Custom chemistry
Conductive (ESD-safe) for electronics. Antistatic for cleanrooms. Antimicrobial for medical. Specialty colors and decorative aggregates available on either base.
Ranges by scope.
Every quote is custom. Your written quote breaks down the base system plus each upgrade.
| Scope | Notes |
|---|---|
| 2-Coat Standard | Most commercial fit-outs. Includes prep + 2-coat system + warranty. |
| 3-Coat Heavy-Duty | Forklift, aviation, manufacturing, food production. Adds intermediate broadcast layer. |
| Specialty (ESD / Antimicrobial / Conductive) | Industry-specific chemistry, certifications, and substrates. |
| Large-scale (20,000+ sq ft) | Phased install programs for facilities that need to stay operational. |
Built into the slab, not laid on top of it. Every one of these installs runs through the same Epoxy Guys prep sequence we have used since 2012.
Questions we hear a lot.
The ones that come up most often on quotes. Ask us anything else.
How is N.E.A.T. different from the Signature residential system?
Will N.E.A.T. handle forklift traffic?
Can you install while we stay operational?
Is N.E.A.T. USDA / FDA / GMP compatible?
How long does a typical commercial install take?
What’s the warranty?
Do you do small commercial like coffee shops and salons?
Ready to talk
Spec Your Facility.
Free commercial walk-through. Phased install programs available. Written quote within 24 hours. Epoxy Guys have been at this in Naples since 2012.
Mon-Sat · 8a-6p · Naples, FL
EPOXY GUYS LLC
Over 2,000,000 square feet of floors installed across Southwest Florida since 2012 by a family-owned crew.